Unit of competency Outline
Information current as of
12/09/2026 4:30 PM AWST
12/09/2026 4:30 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use hand tools
Use hand tools
Unit of competency
National Code
MEM18001
MEM18001
State Code
OAU93
OAU93
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
24/01/2020
Original Release Date
26/06/2019
Nominal Hours
18
Field of Education
030717 - Plant And Machine Operations
Description
This unit of competency defines the skills and knowledge required to use a range of hand tools for a variety of general engineering applications.This unit should not be selected if the hand tool is dedicated to a single operation or machine or when a machine-specific/customised tool is used.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.Where the selection and use of engineering measuring equipment is required unit MEM12023 Perform engineering measurements should also be selected.Where the selection and use of power tools/hand held operations is required unit MEM18002 Use power tools/hand held operations should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 2
General notes
N/A
Elements and Performance Criteria
1 Determine job requirements
- 1.1 Follow standard operating procedures (SOPs)
- 1.2 Comply with work health and safety (WHS) requirements at all times
- 1.3 Use appropriate personal protective equipment (PPE) in accordance with SOPs
- 1.4 Identify job requirements from specifications, drawings, job sheets or work instructions
2 Use hand tools for general engineering applications
- 2.1 Select hand tools appropriate to the task requirements
- 2.2 Use hand tools to produce outcomes that meet job specifications
- 2.3 Identify unsafe or faulty tools and mark for repair according to designated procedures before, during and after use
- 2.4 Undertake routine maintenance of tools using engineering principles, tools, equipment and procedures
- 2.5 Store hand tools safely in appropriate location according to procedures and manufacturers’ recommendations
No information
No information