Skill set Outline
Information current as of
13/09/2026 7:58 PM AWST
13/09/2026 7:58 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Non Destructive Testing - Level 2 NDT practitioner
Non Destructive Testing - Level 2 NDT practitioner
Skill set
National Code
MEMSS00001
MEMSS00001
State Code
AC213
AC213
TGA Status
Replaced
Replaced
DTWD Status
Replaced
Replaced
National Endorsed, State Implementation and Classification
AQF Level
—
Field of Education
—
Skillset Type
National
Original TGA Release Date
27/08/2013
Current Release Date
27/08/2013
Current Release Number
1.00
Approved Date
22/12/2017
Nominal Hours
288
Duration
1 Semester
Releases
| Release Version | Release Date | TGA Status | DTWD Status |
|---|---|---|---|
| 1.00 | 27/08/2013 | Current | Approved |
Description
This Skill Set is intended to build on existing trade or technical qualifications. The competencies can also provide credit towards higher level qualifications within the Metal and Engineering Training Package. It covers the skill and knowledge requirements that may lead to certification against AS 3998/ISO 9712 - LEVEL 2 in the following methods:
penetrant testing
eddy current testing
ultrasonic testing
radiographic testing
However, the certifying body may impose additional requirements before a NDT practitioner can work in the field. Applicants should check full certification requirements with the relevant body. Entrants to this Skill Set should have sufficient workplace skills in OH&S, communication and teamwork that provide underpinning competency to acquire and apply the Skill Set.
An individual certified to NDT level 2 is qualified to perform and direct non-destructive testing in accordance with established or recognized procedures. This may include:
defining the limitations of application of the test method for which the level 2 individual is qualified;
translating NDT codes, standards, specifications and procedures into practical testing instructions adapted to the actual working conditions;
setting up and verifying equipment settings;
performing and supervising tests;
interpreting and evaluating results according to applicable codes, standards and specifications;
preparing NDT instructions;
carrying out or supervising all level 1 duties;
training or guiding personnel below level 2; and
organizing and reporting results of non-destructive tests.
penetrant testing
eddy current testing
ultrasonic testing
radiographic testing
However, the certifying body may impose additional requirements before a NDT practitioner can work in the field. Applicants should check full certification requirements with the relevant body. Entrants to this Skill Set should have sufficient workplace skills in OH&S, communication and teamwork that provide underpinning competency to acquire and apply the Skill Set.
An individual certified to NDT level 2 is qualified to perform and direct non-destructive testing in accordance with established or recognized procedures. This may include:
defining the limitations of application of the test method for which the level 2 individual is qualified;
translating NDT codes, standards, specifications and procedures into practical testing instructions adapted to the actual working conditions;
setting up and verifying equipment settings;
performing and supervising tests;
interpreting and evaluating results according to applicable codes, standards and specifications;
preparing NDT instructions;
carrying out or supervising all level 1 duties;
training or guiding personnel below level 2; and
organizing and reporting results of non-destructive tests.
Pathway Information
Not applicable.
Licensing / Regulatory Information
Not applicable.
Target Group
This Skill Set is appropriate for experienced trade and technical personnel such as NDT technicians, quality assurance inspectors and other operators required to conduct non destructive testing of materials and components using a range of test methods.
The roles, training and experience requirements for NDT operators are defined through a comprehensive range of national and international standards which identify a three level structure. Certification is for a limited period, five years initially, and must be renewed, either on the basis of continuing work experience in the appropriate area or examination. After ten years re-certification is based on examination.
The roles, training and experience requirements for NDT operators are defined through a comprehensive range of national and international standards which identify a three level structure. Certification is for a limited period, five years initially, and must be renewed, either on the basis of continuing work experience in the appropriate area or examination. After ten years re-certification is based on examination.
Suggested words for statement of attainment
These competencies are taken from the Metal and Engineering Training Package and provide training that may meet the minimum skill and knowledge requirements for industry certification as a Level 2 NDT practitioner.
General notes
Schedule
| State Code | National Code | Title | Hours | Type |
|---|---|---|---|---|
| WA639 | MEM24012C | Apply metallurgy principles | 36 | Unit of competency |
| W5704 | MEM24006B | Perform eddy current testing | 54 | Unit of competency |
| W5700 | MEM24002B | Perform penetrant testing | 36 | Unit of competency |
| W5696 | MEM24010B | Perform radiographic testing | 54 | Unit of competency |
| W5706 | MEM24008B | Perform ultrasonic testing | 54 | Unit of competency |
| W5563 | MEM18001C | Use hand tools | 18 | Unit of competency |
| W5501 | MEM13013B | Work safely with ionizing radiation | 36 | Unit of competency |
Replaced By
| State Code | National Code | Title | Type |
|---|---|---|---|
| AF137 | MEMSS00002 | Non-Destructive Testing - Level 2 NDT practitioner | Skill set |