Module Outline
Information current as of
30/10/2026 7:07 PM AWST
30/10/2026 7:07 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use physics in engineering
Use physics in engineering
Module
National Code
DCSPHY633
DCSPHY633
State Code
BD847
BD847
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
22/09/2026
Field of Education
Nominal Hours
60
Description
This unit describes the performance outcomes, skills and knowledge required to solve problems involving linear motion, momentum, impulse, forces, work, energy, power, friction, heat transfer, thermal expansion, the atomic model, basic electricity and to conduct and report on experiments.
The unit of competency is applied by technicians in an engineering environment to perform basic calculations and solve problems relating to physics.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
The unit of competency is applied by technicians in an engineering environment to perform basic calculations and solve problems relating to physics.
No licensing, legislative, regulatory or certification requirements apply to this unit at the time of publication.
General notes
No information
No information
Elements and Performance Criteria
Use unit systems for the measurement of quantities.
- 1.1 Measure quantities using S.I. units.
- 1.2 Convert quantities between different unit systems.
Solve problems involving linear motion.
- 2.1 Solve motion problems involving constant velocity and constant acceleration.
- 2.2 Evaluate acceleration, velocity, displacement and duration using graphical and/or numerical procedures.
Solve problems involving momentum, impulse and force.
- 3.1 Solve problems involving the principle of conservation of momentum.
- 3.2 Solve problems involving impulse and change of momentum.
- 3.3 Solve problems involving forces in accelerated linear motion.
- 3.4 Distinguish between mass and weight.
Solve problems involving work and energy.
- 4.1 Solve problems involving the evaluation of quantities of work and energy (potential and kinetic energy).
- 4.2 Solve engineering problems involving mechanical power and efficiency.
- 4.3 Apply the principle of conservation of energy.
- 4.4 Solve problems involving loss of energy due to friction and drag.
Solve problems involving temperature and heat.
- 5.1 Convert temperature between different scales.
- 5.2 Identify different heat transfer processes (conduction, convection, radiation).
- 5.3 Solve problems involving heat energy transfer and states of matter.
- 5.4 Solve problems involving thermal expansion.
Describe the atomic model of matter and solve problems involving electric circuits.
- 6.1 Identify the components and configuration of the atom.
- 6.2 Identify the components and variables in an electric circuit.
- 6.3 Solve problems involving electric circuits, electrical machinery and power.
Perform, report and assess experiments.
- 7.1 Apply procedures for experiments.
- 7.2 Perform and analyse measurements.
- 7.3 Analyse experiment results to assess the validity of stated hypotheses and attainment of aims.
- 7.4 Report and comment on experiment aims, procedure and conclusions.
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| AZ017 | DCSPHY606 | Use physics in engineering | Module |
Associated Qual/Courses
| State Code | National Code | Title | Type |
|---|---|---|---|
| BHW56 | 52950WA | Advanced Diploma of Civil and Structural Engineering | Accredited course |
| BHW53 | 52951WA | Diploma of Civil and Structural Engineering | Accredited course |