Unit of competency Outline
Information current as of
12/09/2026 7:14 PM AWST
12/09/2026 7:14 PM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Use drawings, diagrams, schedules, standards, codes and specifications
Use drawings, diagrams, schedules, standards, codes and specifications
Unit of competency
National Code
UEECD0051
UEECD0051
State Code
OCC28
OCC28
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
12/07/2021
Original Release Date
05/10/2020
Nominal Hours
36
Field of Education
031313 - Electrical Fitting, Electrical Mechanics
Description
This unit involves the skills and knowledge required to use drawings, diagrams, cable schedules, industry standards, codes of practice and specifications as they apply to various electrotechnology work functions.It includes interpreting schematic, wiring and mechanical diagrams, equipment and cable/connection schedules and manuals; and the use and format of compliance standards, codes and job specifications used in the electrotechnology industry. It also includes the use of site and architectural drawings/plans to show the location of services, apparatus, plant and machinery.No licensing, legislative or certification requirements apply to this unit at the time of publication.
General notes
N/A
Elements and Performance Criteria
1 Prepare to use drawings, diagrams, schedules and manuals
- 1.1 Hazards are identified, risks are assessed and control measures are implemented
- 1.2 Need for drawings, diagrams, schedules or manuals is determined from the nature of work to be undertaken
- 1.3 Relevant drawings, diagrams, site plans and cable/connection schedules or manuals required for the work to be undertaken are determined and obtained in accordance with workplace procedures
2 Use drawings, diagrams, schedules and manuals to obtain job information
- 2.1 Drawings, diagrams and cable/connection schedules are interpreted using drawing layouts, conventions and symbols
- 2.2 Dimensions are extracted from drawings and diagrams in accordance with workplace procedures for application to the work to be undertaken
- 2.3 Location of equipment is determined from equipment cable/connection schedules and location diagrams
- 2.4 Information relating to work to be undertaken is located and interpreted from relevant cable/connection manuals in accordance with workplace procedures
3 Use drawings, diagrams, schedules and manuals to convey information and ideas
- 3.1 Drawing conventions are applied in neat and legible freehand drawings to convey information and ideas to person/s involved in the work to be undertaken
- 3.2 Drawing conventions are used to neatly correct freehand original job drawing to show final 'as-installed' arrangement in accordance with workplace procedures
- 3.3 Corrected drawings are forwarded to appropriate person/s in accordance with workplace procedures
4 Comply with industry standards, codes of practice and specifications
- 4.1 Industry standards and codes of practice that specifically apply to relevant disciplines are obtained in accordance with workplace procedures
- 4.2 Format of industry standards and codes of practice that apply to relevant disciplines are reviewed and applied in accordance with workplace procedures
- 4.3 Purpose, format and content of job specifications are reviewed and applied
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| S7311 | UEENEEE107A | Use drawings, diagrams, schedules, standards, codes and specifications | Unit of competency |