Unit of competency Outline
Information current as of
12/09/2026 11:53 AM AWST
12/09/2026 11:53 AM AWST
Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.
Perform engineering measurements
Perform engineering measurements
Unit of competency
National Code
MEM12023
MEM12023
State Code
OAV35
OAV35
TGA Status
Current
Current
DTWD Status
Approved
Approved
State Implementation and Classification
Approved Date
24/01/2020
Original Release Date
26/06/2019
Nominal Hours
48
Field of Education
120103 - Literacy And Numeracy Programmes
Description
This unit of competency defines the skills and knowledge required to perform measurements requiring straightforward use of mechanical measuring devices which incorporate visual inspections representing units of measurement and associated calculations in a range of manufacturing, engineering and related environments. Measurements may be expressed in metric or imperial units.Electrical/electronic devices used are those not requiring the connection or disconnection of circuitry.Where the interpretation of technical drawings is required unit MEM09002 Interpret technical drawing should also be selected.No licensing, legislative or certification requirements apply to this unit at the time of publication.Band: AUnit Weight: 5
General notes
N/A
Elements and Performance Criteria
1 Determine job requirements
- 1.1 Follow standard operating procedures (SOPs)
- 1.2 Comply with work health and safety (WHS) requirements at all times
- 1.3 Identify job requirements from specifications, sketches, job sheets or work instructions
2 Select appropriate device or equipment
- 2.1 Determine measurement requirements from specifications
- 2.2 Select appropriate device or equipment to achieve required outcome according to SOPs
3 Obtain measurements using a range of measuring devices
- 3.1 Use correct and appropriate measuring technique
- 3.2 Obtain measurements accurately in a safe and effective manner
- 3.3 Determine or verify dimensions using calculations, as required
4 Maintain measuring devices
- 4.1 Undertake routine care and storage of devices to manufacturers' specifications or SOPs
- 4.2 Make routine adjustments to devices to maintain device accuracy
5 Communicate measurements as required
- 5.1 Record measurements accurately, as required
- 5.2 Prepare freehand sketch which depicts required information, as required
No information
No information
Replaces
| State Code | National Code | Title | Type |
|---|---|---|---|
| W5492 | MEM12023A | Perform engineering measurements | Unit of competency |