Accredited course Outline

Information current as of
10/09/2026 9:47 PM AWST

Whilst all efforts are made to provide accurate and timely information from the relevant source/documentation, please be aware that the information supplied may not be the most current version. The accuracy of the detail has not been confirmed by the Department and therefore should not be relied upon without first confirming the contents.

Certificate IV in Integrated Technologies

Certificate IV in Integrated Technologies

Accredited course
National Code
22519VIC
State Code
BGO69
TGA Status
Replaced
DTWD Status
Replaced
Accreditation, State Implementation and Classification
Approved Date
23/03/2020
Field of Education
0313 - Electrical And Electronic Engineering And Technology
AQF Level
Certificate IV in
Nominal Hours
674
Duration
2 Semesters
Stream of Study
Accredited Date
01/01/2020
Expiry Date
30/06/2025
VET Act Classifier
C
VET Act Conditions
Description

The purpose of this course is to provide learners with knowledge and skills in a range of technologies, in particular, the blending of these technologies into new and innovative applications and to service and maintain these applications.

Schedule
Pathways
State Code Title
AB84 Robotics Control Systems
Packaging Rules
To be eligible for the award of the 22519VIC Certificate IV in Integrated Technologies, participants must successfully complete a total of fifteen (15) units consisting of:
- seven (7) core units plus
- any eight (8) elective units selected from the list below
or
- minimum of any four (4) elective units selected from the list below and the remaining elective units (maximum of four (4) units), can be selected from any training package qualification or accredited course provided each unit is consistent with the vocational outcomes of this course and doesn’t jeopardise the AQF integrity of this course.

Participants who do not complete all the required units for the qualification will be issued with a Statement of Attainment listing the units they have successfully completed.
1. Core Units

Complete seven (7) core units.

State Code National Code Title Hours Type
AY798 VU22747 Apply computer tools and networking in an integrated technology context 50 Module
S7307 UEENEEE101A Apply Occupational Health and Safety regulations, codes and practices in the workplace 18 Unit of competency
S7308 UEENEEE102A Fabricate, assemble and dismantle utilities industry components 36 Unit of competency
AY792 VU22333 Perform intermediate engineering computations 40 Module
W5446 MEM30007A Select common engineering materials 40 Unit of competency
AY797 VU22746 Undertake an integrated technology project 60 Module
WC435 UEENEEE141A Use of routine equipment/plant/technologies in an energy sector environment 36 Unit of competency
2. Elective Units

Complete any eight (8) elective units selected from the list below or a minimum of any four (4) elective units selected from the list below and the remaining elective units (maximum of four (4) units), can be selected from any training package qualification or accredited course provided each unit is consistent with the vocational outcomes of this course and doesn’t jeopardise the AQF integrity of this course.

State Code National Code Title Hours Type
AUW52 ICTSAS412 Action change requests 45 Unit of competency
WC394 UEENEED115A Administer computer networks 72 Unit of competency
AY808 VU22757 Apply basic scientific principles and techniques in mechanical engineering situations 80 Module
AY799 VU22748 Apply mathematics in an integrated technology context 50 Module
AUP76 ICTNWK405 Build a small wireless local area network 20 Unit of competency
AZ192 VU22963 Build and implement a basic network 100 Module
AUP62 ICTNWK408 Configure a desktop environment 40 Unit of competency
AZ193 VU22964 Configure a small to medium network for an organisation 90 Module
AUP57 ICTNWK303 Configure and administer a network operating system 40 Unit of competency
AY793 VU22338 Configure and program a basic robotic system 60 Module
AUW47 ICTSAS425 Configure and troubleshoot operating system software 40 Unit of competency
AX663 VU22257 Configure security devices for an organisation 80 Module
AY803 VU22752 Develop, enter and verify programs for SCADA systems 60 Module
AY794 VU22674 Explore applications and operation of the Internet of Things (IoT) 20 Module
S7310 UEENEEE105A Fix and secure electrotechnology equipment 18 Unit of competency
AY806 VU22755 Identify and repair faults in AC motor control systems 60 Module
AY807 VU22756 Identify and repair faults in DC motor control systems 60 Module
AUW54 ICTSAS410 Identify and resolve client ICT problems 35 Unit of competency
AY795 VU21270 Implement control processes using PLCs 80 Module
AY804 VU22753 Install and maintain induction motors 60 Module
AUP73 ICTNWK410 Install hardware to a network 40 Unit of competency
AUW23 ICTSAS307 Install, configure and secure a small office or home office network 50 Unit of competency
AY800 VU22749 Install, test and commission transducers and sensors 60 Module
WC403 UEENEED124A Integrate multiple computer operating systems on a client server local area network 72 Unit of competency
AZ195 VU22966 Investigate design concepts of an accessible and secure network 90 Module
AUW48 ICTSAS426 Locate and troubleshoot ICT equipment, system and software faults 40 Unit of competency
AUW37 ICTSAS409 Manage risks involving ICT systems and technology 20 Unit of competency
AUW40 ICTSAS418 Monitor and administer security of an ICT system 20 Unit of competency
WE078 MEM30031A Operate computer-aided design (CAD) system to produce basic drawing elements 40 Unit of competency
AY805 VU22754 Perform precision measurements 30 Module
AUW42 ICTSAS420 Provide first-level remote help desk support 35 Unit of competency
AUP69 ICTNWK301 Provide network systems administration 20 Unit of competency
AX460 VU21990 Recognise the need for cyber security in an organisation 60 Module
AX463 VU21993 Secure a networked personal computer 60 Module
AZ194 VU22965 Secure and monitor the performance of a small to medium network 100 Module
WE923 MEM23064A Select and test mechatronic engineering materials 20 Unit of competency
AY802 VU22751 Set up and commission programmable logic controllers (PLCs) 40 Module
W5263 MEM30011A Set up basic pneumatic circuits 24 Unit of competency
AY796 VU22563 Set up mechatronics engineering systems 60 Module
S7309 UEENEEE104A Solve problems in d.c. circuits 72 Unit of competency
S7318 UEENEEG101A Solve problems in electromagnetic devices and related circuits 54 Unit of competency
S7319 UEENEEG102A Solve problems in low voltage a.c. circuits 72 Unit of competency
S7315 UEENEEG006A Solve problems in single and three phase low voltage machines 72 Unit of competency
AUW46 ICTSAS424 Support different operating systems 40 Unit of competency
AUW43 ICTSAS419 Support system software 45 Unit of competency
AUW44 ICTSAS421 Support users and troubleshoot desktop applications 20 Unit of competency
S7323 UEENEEG106A Terminate cables, cords and accessories for low voltage circuits 36 Unit of competency
S7311 UEENEEE107A Use drawings, diagrams, schedules, standards, codes and specifications 36 Unit of competency
WC388 UEENEED104A Use engineering applications software on personal computers 36 Unit of competency
AUU13 ICTICT103 Use, communicate and search securely on the internet 50 Unit of competency
AX458 VU21988 Utilise basic network concepts and protocols required in cyber security 80 Module
AY801 VU22750 Write programs for programmable logic controllers (PLCs) 60 Module
Replaces
State Code National Code Title Type
BCV95 22263VIC Certificate IV in Integrated Technologies Accredited course
Replaced By
State Code National Code Title Type
BHE71 22697VIC Certificate IV in Integrated Technologies Accredited course
General Notes
No information
Entry Requirements
There are no essential entry requirements for this course. However, learners are best equipped to achieve the vocational outcomes of this course if they have:
- language, literacy and numeracy skills that are equivalent to Level 3 of the Australian Core Skill Framework (ACSF).
- digital literacy and technology skills to self-manage generic software applications such as the ability to:
- navigate within the system
- save, retrieve and open files
or
- completion of Certificate II in Integrated Technologies or a trade qualification such as the Certificate III in Electrotechnology (Electrician)

Learners who have a lower level of language and literacy skills or digital literacy and technology skills to self-manage generic software applications, may require additional support to complete the course.
No information